The wood components of our grinders and storage jars are finished with food-grade wood balm with natural oils, waxes and fragrances. We recommend applying natural food-grade wood oil or wax to the whole surface twice a year. Apply a thin film of oil/wax using a clean, soft cloth and rub it into the wood until the oily film disappears. Use a clean, soft cloth if you need to remove excess oil/wax.
It is best to remove the loose debris after every use with a soft brush (super easy and fast). Regularly clean the grinder to maintain a smooth function. Don’t wait too long between cleanings.
Regular cleaning will keep your grinder in top shape and will ensure the best experience.
First, disassemble your grinder completely and remove all seals. Always use a soft cloth or paper towel for cleaning. Dip the cloth /paper towel in warm water, wring it nearly dry and wipe the area clean. Finally, dry it using a soft, clean cloth. If your grinder needs a thorough cleaning use a mild liquid hand soap (ph 6-8). Clean the surface thoroughly till all of the dirt or debris are removed.
Note: When wood is in contact with water, some of the grain can raise, causing the wood to feel rough after it has dried. Don’t worry. You can easily remove the raised grain with a fine sandpaper (U.S. standard 400-500 or European standard p800-p1000).
Remove the grain by smoothly sanding all affected areas with just a little bit of pressure. Remove all sanding dust from the wood afterwards. You can use a hairdryer (cold), compressed air or a soft brush to do so.
WAXING
Our RECOMMENDATION: Stona Wood Balm
It enhances the natural wood structure, is easy to apply and provides simple maintenance. Food-safe and non-toxic.
When your Stona grinder feels a little bit dry or has lost its shine, it may be time to apply wood wax.
Clean your grinder. Ensure that the surface is completely dry and free of dirt or loose debris.
Wax not only keeps your wood grinder looking shiny and new, it provides a layer of protection that helps reduce friction and keeps function smooth.
Disassemble the wooden parts and remove the seals.
Use a paste wax/wood balm to treat and finish your grinder. Apply a thin coat of paste wax to the surface using a soft cotton cloth, soft kitchen paper towel or just your bare fingers. Don’t apply wax to the grooves of the seals. If the wax gets in the grooves, remove it with a dry cloth. Let it sit for about 30 minutes or until the shine has diminished. Remove all excess wax with a soft cotton cloth or kitchen paper towel and let the wax dry overnight. Apply a second layer and repeat the steps mentioned above.
Extra step for our wood enthusiasts: After the final coat of wax has dried overnight, you can polish the wood by hand or with a polishing machine. We recommend using a lamb's wool pad and polishing until all the streaking has been removed and the sheen is even.
PASSIVE CARE OF YOUR STONA GRINDER
Wood reacts to environmental changes, such as moisture, temperature and light. The tips below should help you to preserve your Stona products.
- Sunlight - Keep your grinder away from direct sunlight. Wood is especially susceptible to sun damage. Stona products should be kept out of direct sunlight, and away from heat sources. If exposed to these conditions the wood will eventually split or crack, and the wood will dry out.
- Humidity & Temperature - Wood is a hygroscopic material. It reacts to changes in humidity and temperature. Wood shrinks when exposed to low humidity and expands when exposed to high humidity. Humidity levels should be kept between 40 to 55% , this will guard the product from shrinking, cracking, or expansion. This is also the range considered normal for living condition and best for health.
Did not find the answer to your question? Just drop us a line at hey@iamstona.com or send us a message via our contact page.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Liquid error: Could not find asset snippets/pb_currency.liquid
